Tungsten carbide saw tips is used as the raw material of hard alloy. It is usually used to weld the saw blade to enhance the strength of the tool while extending its service life and has wide application. Hard alloy material has the characteristics of high hardness and high wear resistance, thus carbide blade in the process of tool also shows high toughness and greatly prolong the working life of the cutting tool processing, compared with other materials of the saw tooth favored by more users.

Carbide blade high wear-resisting performance, users in the use process often need to change, and the cutting tool on the equipment when high speed machining is not easy to loose, which greatly improves the cutting tool machining efficiency and quality. In addition, according to the different application environment, the hard alloy blade can be made of different hard alloy plate number. The international brand is mainly used in the number of K10 to K30. Some users can apply the coating of other materials on the saw tooth surface to enhance the hardness of hard alloy, and can greatly enhance the strength of the saw tooth in some way.

Hard alloy serrated is used to prolong the service life of the cutter, but some users do not recommend hard alloy as the piece material of the saw blade. The main reason is the cost, although the hard alloy products have high cost performance. In addition, hard alloy materials are more fragile than other materials such as steel. So they consider adopting steel for saw blade body, so the blade is not easy to break or split phenomenon in the process of machining, and better performance of hard alloy blade, the blade has greatly increased the efficiency. According to relevant data, the processing edge of hard alloy sawtooth can grow to 10~20 times than that of steel.

Maintenance and maintenance of tungsten carbide saw tips

Grinding in time is very important, because the passivation of tungsten carbide saw tips edge at work, because the resistance increases, easy cause blade jitter, increases the motor load at the same time, the saw blade and the machine will cause damage. Continue cutting at the time of grinding, with each additional 10% of the cutting, will bring an additional 50% of the alloy damage and shorten the service life of the saw blade. Must be regularly remove gathered in the resin on the side of the sawtooth, debris and other sundry, because of the steady accumulation of gelling material, will increase the resistance, causing energy-intensive (extreme cases, can cause the machine motor burning) and rough cutting quality. If the blade is blunt at the same time, it is possible to cause sawtooth damage. When stored, should be placed separately, not superimposed and placed on metal objects, preferably in the original carton, so that it can be moved and removed.

Repair for tungsten carbide saw tips

With sophisticated, stable and no vibration grinding machine blade, and suitable diamond grinding wheel, in accordance with the prescribed procedures to repair in head of gold, will extend the service life of saw blade, please do not use manual grinding equipment. Before grinding, you must wash away the resin, debris and other sundries that are glued to the saw blade.

Hide Comments | Add Comment