The surface wire drawing process is usually the manual drawing and mechanical drawing.

As , hand-drawn wire is generally aimed at small workpieces, which have a certain shape of workpiece, and the grinding products used are usually industrial baijie. This kind of wire drawing method has low production efficiency, the line effect is unstable, so it is not mainstream in industrial production, the mainstream is mechanical drawing.

The advantages of mechanical drawing are fast, high degree of automation, and stable and controllable drawing effect. Mechanical drawing is mainly divided into flat - pressed abrasive belt drawing, wire - contact abrasive belt drawing, non-woven roller drawing.

First of all, we introduce the flat - pressed sand strip. The workpiece on the fixture, start the sand machine, abrasive belt high-speed rotation, and then, on the back of abrasive belt with a controlled, can be up and down, left and right sides of mobile press block, but briquetting press, abrasive belt can stick take in wire drawing workpiece surfaces. This kind of mechanical drawing method is a flat wire drawing, which can not have any convex point on the surface of the drawing. It is characterized by a continuous line pattern, long.

Wire contact sand drawing is a traditional drawing method. In different places, the surface of the contact surface of the sand belt is accomplished through the contact wheel instead of the specially designed pressure block. So the workpiece is in contact with the sand, point, line contact, not surface contact. So, even with the same sand belt, there is a distinct difference between line contact and surface contact method.

In addition to the two kinds of mechanical methods used in the use of abrasive belt, there are also non-woven roller wire drawing process. As I said, the non-woven material is also a good material for drawing. Non-woven material is elastic and has a special three-dimensional network structure, so it is commonly used as a wheel. Since the elastic ratio of non-woven material is better than sand belt, it has better surface fitting and is suitable for machining some curved parts. In addition, since the non-woven roller and workpiece are line contact, the surface contact of the peaceful pressure type abrasive belt drawing is less heat and is cold machining.

The above three types are commonly used in industrial production. In practical application, according to the different shape of the workpiece, the different line, and centerless grinding wiredrawing, static drawing several ways, such as but as a result of application is not wide, does not make the detailed discussion here.

To sum up, wire drawing process is a complicated and complicated process. It's difficult is not whether can pull wire lines, but in the case of the customer designated line effect, how to use the hands of the grinding materials, machinery and equipment, how to set the grinding parameters, etc., to pull out the high similarity of lines. Therefore, if you want to satisfy your customers, you should pay more attention to the new types of grinding products in the market, besides the type and performance of the machine.

Posted by: hannahgwendolyn at 09:30 AM | No Comments | Add Comment
Post contains 524 words, total size 3 kb.