September 26, 2017

How to realize easily the low wear of carbide drills

Nowadays on the market is generally a bit alloy steel material whole carbide drills, although the materials are the same, but due to the processing technology, various brands of product quality disparity. Imported and domestic tungsten carbide drills are also very different.

In the mechanical processing industry, enterprises in the production management in order to improve production efficiency, reduce production costs, to ensure machining quality and stability and adequate tool life conditions, which can be achieved by improving the service life of carbide drill bits of hard alloy or improve production efficiency.

In the process of machining, drilling holes or drilling holes are often encountered on the surface or incline, and several cutters are used, which not only affect the cost of production, but also reduce the production efficiency. To this end, cobalt collar developed RT100P high-performance alloy bit, in order to better meet customers’needs.

As an important member of A-Brand products in the series, OSG ADF cemented carbide drill head has multiple functions, stable and high quality of hole machining. Usually, when milling flat bottomed holes, both milling cutters and drills are required. ADF can do one step processing, which can shorten the processing time and simplify the management of tools. And this carbide drills can balance the machining accuracy and reduce the displacement of the drilling hole. The utility model can be widely used in the processing of automobiles, moulds, and various mechanical components.

The cutting edge design ADF uses a sharp cutting angle design, so that in the case of low cutting force can minimize the reduction of material on the formation of burrs; have large chip removal groove, so as to achieve a smooth chip removal.

Patent coating ADF uses the latest patented coating EgiAs, OSG,even in the case of high temperature, this kind of carbide drill bitscan also achieve long life and low wear.

The design of cutting stability ADF can be applied to a wide range of machining conditions, including machining surfaces, surfaces, holes, eccentric holes, thin materials, etc.

 

Processing situation

 

The design of processing range ADF can be applied to a wide range of machining conditions, including machining surfaces, surfaces, holes, eccentric holes, thin materials, etc.. Applicable to a variety of common processing materials, such as carbon steel, alloy steel, hardened steel and cast iron of up to 35HRC. Standard type diameter from 2mm to 20mm, lengthened type directly from 3mm to 20mm.

Posted by: hannahgwendolyn at 10:04 AM | No Comments | Add Comment
Post contains 410 words, total size 3 kb.




What colour is a green orange?




17kb generated in CPU 0.461, elapsed 6.3462 seconds.
35 queries taking 6.2749 seconds, 104 records returned.
Powered by Minx 1.1.6c-pink.