Tungsten alloy plates are refractory metal, which have two-phase composites consisting of W-Ni- Fe or W-Ni- Cu or even W-Ni-Cu-Fe, some tungsten alloys also contain Co、Mo、Cr, etc. Tungsten alloy can be machined into various shapes, such as rods, cubes, blocks, bricks, rings, plates, etc.

Applications for Tungsten Alloy Plate:

1) Sports goods: Professional tungsten alloy plate for darts benchmarking. The to fall series: the bullet type, type water, pipe type, half water droplets type, type cylinder have.

2) Counterweight products: High-density tungsten alloy plates with counterweight series: with the balance of mechanical hammer; Fly hammer; Oil drilling counterweight rod; Darts rod; Golf counterweight piece; The car counterweight piece; mobile phones, game oscillator; aerospace the gyroscope; The pendulum clocks; counterweight balance ball; Shockproof tool rod.

tungsten alloy plate

3) Electrical material: electrical discharge machining of electrode and resistance welding electrode; high proportion electrical contacts, air circuit breaker in the contacts.

4) High temperature alloy heat sink: due to high temperature resistant and good thermal performance, electronics industry isswitching to tungsten alloy plates as heat sink materials.

Tungsten Alloy Plate Introduction

Tungsten Alloy Plates properties

1, Width*Length: (2.0-250.0mm)*(2.0-250.0mm)

2, Thickness: 2mm-15mm

3, Density: 15.8-18.75 g/cm3

4, Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu

5, Surface: Sintering surface, Forged surface, Ground surface

Tungsten alloy plates are produced by good processing property billets and special cold and hot rolling technology; they can be used to make tungsten target, tungsten heat elements, tungsten radiation shields and tungsten boats for electronics, lightening, electro-vacuum industries.

Tungsten alloy plates play very important role in manufacturing of collimator for nuclear medicine, nuclear research, geologging and homeland security. These materials provide reliable protection against X-rays and gamma radiation.

The thickness of the tungsten alloy plate is as follows:

Foil - a thickness of less than 0.005 in. (0.13 mm).

Plate - thickness greater than or equal to 0.188 inches (4.75 mm).

Sheet - thickness less than or equal to 0.187 inches (4.75 mm) to greater than or equal to 0.005 inches (0.13 mm)
Related link:

http://www.wococarbide.com/Library/libraryinfo/id/590

Posted by: hannahgwendolyn at 09:31 AM | No Comments | Add Comment
Post contains 343 words, total size 3 kb.